Nest 0 Cart
Nest Account
Popular Exams
All Categories...
Nest
Nest 0
Contact
Log In / Sign Up
Copyright 2024 © store. All rights reserved.
Home Cisco® 350-601

Cisco® 350-601 Exam Practice Questions (P. 5)

  • Full Access (526 questions)
  • Six months of Premium Access
  • Access to one million comments
  • Seamless ChatGPT Integration
  • Ability to download PDF files
  • Anki Flashcard files for revision
  • No Captcha & No AdSense
  • Advanced Exam Configuration
Get Contributor Access
Question #41

Refer to the exhibit. VLAN 10 is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?
A.

B.

C.

D.


Correct Answer:
D
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/ b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-
OS_System_Management_Configuration_Guide_7x_chapter_011100.html

Question #42
An engineer performs a set of configuration changes for the vPC domain using Session Manager. Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two.)
  1. A
    commit
  2. B
    verify
  3. C
    apply
  4. D
    checkpoint
  5. E
    write

Correct Answer:
AB
Verifying a Session -
To verify a session, use the following command in session mode.


Committing a Session -
To commit a session, use the following command in session mode.

Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/sm_rollback.html

Question #43

Refer to the exhibit. An engineer must monitor all LAN traffic on Fabric A from a blade server. Which source should be configured in the test-span monitor session to complete this task?
  1. A
    all uplink FCoE ports
  2. B
    all vNICs from the service profile that correspond to this server
  3. C
    all uplink Ethernet ports
  4. D
    all vHBAs from the service profile that correspond to this server

Correct Answer:
B
Reference:
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

Question #44
An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the same STP bridge ID from the upstream vPC switch peers. Which vPC feature must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?
  1. A
    vpc local role-priority 4000
  2. B
    peer-switch
  3. C
    system-mac 0123.4567.89ab
  4. D
    peer-gateway

Correct Answer:
B
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_Cisco_Nexus_9000_Series_NX-
OS_Interfaces_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html

Question #45
A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to real-time access to operational data. Which technology must be used to meet these requirements?
  1. A
    CLI-based scripting
  2. B
    logging
  3. C
    SNMPv3
  4. D
    streaming telemetry

Correct Answer:
D
Reference:
https://blogs.cisco.com/developer/its-time-to-move-away-from-snmp-and-cli-and-use-model-driven-telemetry

Question #46
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc1/1-12 and then for ports fc1/13-24 for the next 60 seconds. Ports in the range fc1/13-24 were already enabled for analytics. Which set of commands must be used to meet these requirements?
A.

B.

C.

D.


Correct Answer:
B
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming- config-guide-8x/configuring_san_telemetry-streaming.html

Question #47
A customer needs a tool to take advantage of the CI/CD model to streamline its operations and optimize cost. The customer wants to integrate the solution with the Cisco products it currently uses, including Cisco ACI networking and Cisco UCS Series servers. The solution should also provide on-premises Kubernetes and
AppDynamics performance monitoring. Because of the security requirements, the solution should not install a local client on products under management. Which orchestration solution meets these requirements?
  1. A
    Cisco UCS Director
  2. B
    Cisco CloudCenter
  3. C
    Cisco APIC
  4. D
    Cisco DCNM

Correct Answer:
B
With Cisco CloudCenter you can automate multicloud workload deployment and increase feature velocity, consistently enforce multicloud governance, and optimize cloud service consumption to reduce risk and cloud costs.
Streamline consumption of cloud or on-premises services with the combination of CloudCenter with Cisco Container Platform for on-premises Kubernetes, and
AppDynamics for business and application performance monitoring.
Reference:
https://www.cisco.com/c/en/us/products/cloud-systems-management/cloudcenter/index.html

Question #48
A customer wants to offload some of its order processing to a public cloud environment. The customer environment is based on Cisco ACI and uses Puppet with containerized applications. The operations team requires a solution to orchestrate and optimize the cost of the new solution. Which product must be used to meet these requirements?
  1. A
    Cisco Workload Optimization Manager
  2. B
    Cisco CloudCenter
  3. C
    Cisco Intersight
  4. D
    Cisco Data Center Network Manager

Correct Answer:
B
Cisco CloudCenter has the following key features:
- Enforce multicloud governance by guiding user decisions to reduce risk
- Securely automate deployment to reduce manual effort and get consistent results
- Increase feature velocity via integration with developer tools to accelerate time to market (CI/CD = Puppet, Chef, and Ansible).
- Optimize cloud consumption to cut pay-per-use cloud costs
Reference:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/cloudcenter-suite/datasheet-c78-741886.html

Question #49
DRAG DROP -

Refer to the exhibit. Drag and drop each traffic flow type from the left onto the corresponding number on the right. Not all traffic flow types are used.
Select and Place:


Correct Answer:

Question #50
DRAG DROP -
A network engineer is asked to describe the cloud infrastructure models from the perspective of their operation and access to resources. Drag and drop the descriptions from the left onto the appropriate characteristics on the right.
Select and Place:


Correct Answer:

Previous Questions Next Questions

All Pages