Huawei H13-629 Exam Practice Questions (P. 3)
- Full Access (364 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #21
Which of the following copy is supported by OceanStor V3 remote file system?
- ASynchronous and asynchronous replication
- BSimultaneous replication
- CAsynchronous replication
- Dsupport multiple file system consistency replication
Correct Answer:
C
C
send
light_mode
delete
Question #22
On the Windows Server 2008 R2 system hard disk partition to set a reasonable sector (cluster) size is correct:
- ACreate a 2TB NTFS volume, the default sector (cluster) size is 8KB.
- BCreate a 30GB FAT32 volume, the default sector (cluster) size is 8KB.
- CNTFS volumes can be set to the largest sector (cluster) to 512KB.
- DThe smallest sector (cluster) that an NTFS volume can set is 4KB.
Correct Answer:
B
B
send
light_mode
delete
Question #23
A VTL6900-I system, the backup server connected to it is the Linux operating system. The backup server and the VTL6900-I system are directly connected through the FC.
The server identifies the device information as shown below. After the backup server is configured as a backup client for the VTL6900-I system and the backup
VTL system on the server virtual library process, which the following operation and description is correct:
(Multiple choice.)
The server identifies the device information as shown below. After the backup server is configured as a backup client for the VTL6900-I system and the backup
VTL system on the server virtual library process, which the following operation and description is correct:
(Multiple choice.)
- AWhen configuring the backup client on the VTL side, you need to know that the WWPN of the FC port that connects the VTL to the VTL is available on the server in the sys /class / fc_host directory and subdirectory to the corresponding WWPN port.
- BServer-side identification has been detected with the library device command is cat / proc / scsi / scsi.
- CAs shown in the figure, among the devices identified on the server side, the device labeled 1 is the scanned library.
- DAs shown in the figure, of the devices identified on the server side, the device labeled 2 is the information for the scanned tape.
Correct Answer:
ABC
ABC
send
light_mode
delete
Question #24
The customer needs to create a new OLAP backup database for batch import of online database data at night, and the database software is SQL server 2008.
The database file size is 20TB and the storage array is OceanStor v3, which requires a stable write bandwidth of 1800MB / s.
What kind of allocation set the most suitable customer requirements?
The database file size is 20TB and the storage array is OceanStor v3, which requires a stable write bandwidth of 1800MB / s.
What kind of allocation set the most suitable customer requirements?
- A2TB NL-SAS hard drive, 8D + 2P RAID6 configuration
- BWith 2TB NL-SAS hard disk, configure 8D + 1P RAID5
- C600GB 15Krpm SAS hard drive, 8D + 1P RAID 5 configuration
- DConfigure raid 10 with 600GB 15rpm SAS hard disk
Correct Answer:
C
C
send
light_mode
delete
Question #25
Huawei Oceanstor 9000 node, read and write performance from high to low. What is the correct order?
- AP25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive
- BP25 Node SAS Hard Drive> P25 Node SSD Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive> C36 SATA Hard Drive
- CP25 Node SSD Hard Drive> P25 Node SAS Hard Drive> P36 Node> C36 SATA Hard Drive> P12 SATA Hard Drive
- DP25 Node SSD Hard Drive> P25 Node SAS Hard Drive> C36 SATA Hard Drive> P36 Node SATA Hard Drive> P12 SATA Hard Drive
Correct Answer:
C
C
send
light_mode
delete
Question #26
Double-active disaster recovery solution configuration needs to be done after the acceptance test. Which of the following posting acceptance scenarios business should not be affected? (Multiple choice.)
- ASingle VIS device failure
- BSingle oracle failure
- CA single data center full failure
- DThird-party arbitration array failure
Correct Answer:
ABCD
ABCD
send
light_mode
delete
Question #27
Simpana client fails to perform backup, view the status of the task. It reported the following error "library, mediaAgent, Drive pool, Meida: mount path is offline.
Advice: please check if the mountpath is online adn accessible ".
What may can be the cause of this problem?
Advice: please check if the mountpath is online adn accessible ".
What may can be the cause of this problem?
- AClient offline
- BMedia Services Offline
- CThe client cannot resolve the media server host name
- Dbackup media failure
Correct Answer:
D
D
send
light_mode
delete
Question #28
One customer wants to deploy one OceanStor v3 storage to meet the capacity and performance requirements. Where its specific configuration number of the hard drive is needed to be considered? (Multiple choice.)
- AHard drive capacity
- BMetadata space size
- CHard drive type
- DRAID type
Correct Answer:
ACD
ACD
send
light_mode
delete
Question #29
Huawei disaster preparedness plan, production site deployment oracle RAC cluster, in order to ensure the production side failure, disaster recovery database to provide normal service
Services.
Which of the following statement is correct?
Services.
Which of the following statement is correct?
- ADisaster recovery end must be deployed, oracle rac cluster can not deploy oracle single node.
- BOracle RAC grid production side of the file must be copied to the disaster recovery side.
- CUnable to copy the production side of the FRA file will be able to guarantee the normal provision of services at the northern end.
- DProduction end of the oracle data files and log files can not be placed in the same consistency group.
Correct Answer:
C
C
send
light_mode
delete
Question #30
Which of the following information about the InfoEqualizer function of Huawei OceanStor 9000 is correct? (Multiple choice)
- AWhen using the InfoEqualizer function, you need to configure DNS. If you use an external DNS server, when configuring the DNS server, there is a setting of "reverse lookup zone name", network ID setting in this tab, you need to input network ID in reverse order.
- BWhen there is a DNS server in the user network, the DNS server in the user network does not need to configure the forwarding record. When the user network without DNS service server, configure the InfoEqualizer DNS IP address as the DNS server's address on the client.
- CThe root domain name is the domain name InfoEqualizer configured for the cluster. This domain name must be configured as the fully qualified domain name, that is, the domain name that includes the root node.
- DThe domain name of the partition is configured as the relative domain name, and the root domain name of the InfoEqualizer is automatically taken as the suffix
Correct Answer:
BCD
BCD
send
light_mode
delete
All Pages