HP HP2-Z34 Exam Practice Questions (P. 4)
- Full Access (60 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #16
A multi-tenant data center with 12 tenants has the following goals:
✑ Isolate tenants to enable each tenant to have its own routing space
✑ Isolate the data center's services in its own routing space.
✑ Allow for some leaking of route information among tenants and company services
Which feature should be configured on the data center routing switches?
✑ Isolate tenants to enable each tenant to have its own routing space
✑ Isolate the data center's services in its own routing space.
✑ Allow for some leaking of route information among tenants and company services
Which feature should be configured on the data center routing switches?
send
light_mode
delete
Question #17
An HP Comware Switch 1 supports FCoE for connected servers with Converged Network Adapters (CNAs). On interface Ten 1/0/1 Switch 1 sends FCoE traffic in
VSAN 2 to an upstream switch. Switch 2 which also supports FCoE What is the correct configuration for interface Ten 1/071?
VSAN 2 to an upstream switch. Switch 2 which also supports FCoE What is the correct configuration for interface Ten 1/071?
- AFC trunk port, which permits VSAN 2
- Bbound to a VFC interface, which is a trunk port and permits VSAN 2
- Cbound to a VFC interface, which is an access port in VSAN 2
- DFC access port in VSAN 2
Correct Answer:
C
C
send
light_mode
delete
Question #18
An HP Comware switch supports FCoE in Fibre Channel Forwarder (FCF) mode. A switch interface Ten1/0/1 connects to a server FCoE Converged Network
Adapter (CNA). The CNA will carry normal data traffic and storage traffic for VSAN 2. which is associated with VLAN 20. How does the administrator assign FCoE traffic for this CNA to VSAN 2?
Adapter (CNA). The CNA will carry normal data traffic and storage traffic for VSAN 2. which is associated with VLAN 20. How does the administrator assign FCoE traffic for this CNA to VSAN 2?
- Aby accessing the VSAN 2 configuration view and specifying Ten1/0/1 as a member port of the VSAN
- Bby accessing the VLAN 20 configuration view and specifying Ten1/0/1 as a member port of the VLAN
- Cby setting Ten1/0/1 to FCoE mode and specifying VSAN 2 as the port access VSAN
- Dby binding a VFC interface to Ten 1/0/1 and specifying VSAN 2 as the VFC interface trunk VSAN
Correct Answer:
A
A
send
light_mode
delete
Question #19
Refer to the exhibit -

An administrator is setting up this data center topology to use SPBM VMs in the same subnet should be able to communicate at Layer 2 and be isolated at Layer 2 from other subnets. On which Switch 1 interfaces should the administrator enable SPBM?

An administrator is setting up this data center topology to use SPBM VMs in the same subnet should be able to communicate at Layer 2 and be isolated at Layer 2 from other subnets. On which Switch 1 interfaces should the administrator enable SPBM?
- Ainterfaces Ten1/0/1-Ten1/0/48 and interfaces Forty1/0749-1/0750
- Binterfaces Forty 1/0749-1/075€ only
- CVLAN interfaces 101 and 103
- DVLAN interfaces 10, 20, and 30
Correct Answer:
C
C
send
light_mode
delete
Question #20
An HP IRF virtual switch with two members is implementing SPBM. The administrator wants to ensure that the master can fail without causing topology changes or changes in forwarding tables in the SPBM region. Which setting helps support this requirement?
- Atandem replication for multicasts
- Bpersistent MAC address for IRF
- CBidirectional Forwarding Detection (BFD) Multi-Active Detection (MAD) for the IRF link
- Dnon-stop-forwarding for SPBM
Correct Answer:
C
C
send
light_mode
delete
All Pages