Nest 0 Cart
Nest Account
Popular Exams
All Categories...
Nest
Nest 0
Contact
Log In / Sign Up
Copyright 2024 © store. All rights reserved.
Home Dell DSDSC-200

Dell DSDSC-200 Exam Practice Questions (P. 4)

  • Full Access (116 questions)
  • Six months of Premium Access
  • Access to one million comments
  • Seamless ChatGPT Integration
  • Ability to download PDF files
  • Anki Flashcard files for revision
  • No Captcha & No AdSense
  • Advanced Exam Configuration
Get Contributor Access
Question #16
A storage array is configured with four front-end ports on each controller (in a dual-controller configuration) for server connectivity. The storage array runs in
Legacy Port mode. An engineer needs to provide multi-pathed (2 fabrics) connectivity from the storage array to the server.
What is the minimum number of fault domains required?
  1. A
    8
  2. B
    2
  3. C
    4
  4. D
    6

Correct Answer:
B

Question #17
There are several servers connected to the Storage Center through Fibre Channel (FC) fabrics using WWN zoning. The engineer has recently replaced a servers
FC HB. This server can no longer connect to the Storage Center.
What is causing the problem?
  1. A
    The Storage Center’s Fault Domains must be updated with the new HBA WWN
  2. B
    The server’s zone must be updated with the new switch port to which the HBA is connected
  3. C
    The Storage Center Fault Domains must be converted to Virtual Port mode
  4. D
    The server’s zone must be updated with the new HBA’s WWN.

Correct Answer:
A

Question #18
An engineer has several servers connected to the Storage Center through two FC fabrics. The Storage Center runs in Virtual Ports mode. The engineer needs to create zones based on World Wide Names (WWN).
Which WWNs from the Storage Center need to be included in the zone with the server WWN?
  1. A
    only the Primary WWNs
  2. B
    only the Virtual WWNs
  3. C
    both the Primary and Reserve WWNs
  4. D
    both the Virtual and Physical WWNs

Correct Answer:
B

Question #19
A deployment engineer is installing a dual-controller Storage Center with four FC ports in each controller. This system need to use Legacy Port mode because the
AIX version used requires it.
Which two configurations are required to set up the fault domains? (Choose two.)
  1. A
    There are only two fault domains used, one for primary ports and one for reserved ports.
  2. B
    There is a separate fault domain for each set of primary and reserved ports.
  3. C
    There are only two fault domains used, one for the ports in each fabric.
  4. D
    The primary and reserved ports in the fault domain need to reside on different controllers.

Correct Answer:
CD

Question #20
An engineer needs to install an SC8000 with four FC ports in each controller and two FC switches set up in a dual fabric. Each controller also has two 10 Gb iSCSI ports. All iSCSI ports are connected to an ethernet switch. The system uses virtual ports.
How many fault domains are required?
  1. A
    3
  2. B
    5
  3. C
    4
  4. D
    2

Correct Answer:
C

Previous Questions Next Questions

All Pages