Cisco® 350-501 Exam Practice Questions (P. 3)
- Full Access (465 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #21

Refer to the exhibit. An engineer is preparing to implement data plane security configuration.
Which statement about this configuration is true?
- ARouter 1 and Router 2 advertise the route to 192.0.2.0 to all BGP peers.
- BAll traffic to 192.168.1.0/24 is dropped.Most Voted
- CAll traffic is dropped.
- DRouter 1 drops all traffic with a local-preference set to 150.
Correct Answer:
B
B
send
light_mode
delete
Question #22
Which MPLS design attribute can you use to provide Internet access to a major customer through a separate dedicated VPN?
- AThe Internet gateway router is connected as a PE router to the MPLS backbone.
- BThe CE router supports VRF-Lite and the full BGP routing table.
- CThe Internet gateway inserts the full Internet BGP routing table into the Internet access VPN.
- DThe customer that needs the Internet access service is assigned to the same RTs as the Internet gateway.
Correct Answer:
D
D

Assigning the same Route Targets (RTs) to the customer as those used by the Internet gateway is a smart move in MPLS design for dedicated Internet access. This method simplifies the routing process and ensures that specific Internet routes are conveyed efficiently between the gateway and the customer's network, using VPN route-target communities. Normalizing RTs between customer and Internet access services provides a clean and effective way to integrate and manage these services within the MPLS environment.
send
light_mode
delete
Question #23
Which configuration enables BGP FlowSpec client function and installation of policies on all local interfaces?
- Aflowspec address-family ipv4 local-install interface-all
- Bflowspec address-family ipv4 install interface-all local
- Cflowspec address-family ipv4 install interface-all
- Dflowspec address-family ipv4 local-install all-interface
Correct Answer:
A
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-16-6/irg-xe-16-6-book/C3PL-BGP-Flowspec-Client.html
A
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-16-6/irg-xe-16-6-book/C3PL-BGP-Flowspec-Client.html
send
light_mode
delete
Question #24

Refer to the exhibit. A network engineer is configuring customer edge routers to finalize a L2VPN over MPLS deployment. Assume that the AToM L2VPN service that connects the two CEs is configured correctly on the service provider network.
Which action causes the solution to fail?
- AOSPF does not work with L2VPN services.
- BThe routing protocol network types are not compatible.Most Voted
- CA loopback with a /32 IP address has not been used.
- DThe xconnect statement has not been defined.
Correct Answer:
B
B
send
light_mode
delete
Question #25
An engineer working for telecommunication company needs to secure the LAN network using a prefix list.
Which best practice should the engineer follow when he implements a prefix list?
Which best practice should the engineer follow when he implements a prefix list?
- AAn engineer must identify the prefix list with a number only.
- BThe final entry in a prefix list must be /32.
- CAn engineer must include only the prefixes for which he needs to log activity.
- DAn engineer must use nonsequential sequence numbers in the prefix list so that he can insert additional entries later.Most Voted
Correct Answer:
D
D

Using nonsequential sequence numbers when implementing a prefix list is indeed a best practice. This approach provides flexibility for making adjustments without the need to overhaul the entire list. It allows seamless integration of new entries at any point, accommodating network growth and changes without disrupting the established list. Always plan for the future when designing network architectures, and this method supports easy updates and scalability.
send
light_mode
delete
Question #26

Refer to the exhibit. Which effect of this configuration is true?
- AIt enables MPLS on the interface.
- BIt creates a pseudowire class named cisco.
- CIt enables AToM on interface gigabitethernet1/0.Most Voted
- DIt enables tagging for VLAN 12 on the interface.
Correct Answer:
C
Reference:
https://community.cisco.com/t5/service-providers-documents/configuration-example-atom-any-transport-over-mpls-for-like-to/ta-p/3144810
C
Reference:
https://community.cisco.com/t5/service-providers-documents/configuration-example-atom-any-transport-over-mpls-for-like-to/ta-p/3144810
send
light_mode
delete
Question #27

Refer to the exhibit. Which three outcomes occur if the prefix list is added to the neighbor? (Choose three.)
- A192.168.0.0/16 is denied.Most Voted
- B192.168.0.0/16 is permitted.
- C192.168.0.0/19 is permittedMost Voted
- D192.168.0.0/19 is denied.
- E192.168.0.0/17 is permittedMost Voted
- F192.168.0.0/17 is denied.
Correct Answer:
ACE
ACE
send
light_mode
delete
Question #28
DRAG DROP -
Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Select and Place:

Drag and drop the descriptions from the left onto the corresponding OS types on the right.
Select and Place:

send
light_mode
delete
Question #29
What does DWDM use to combine multiple optical signals?
- AIP protocols
- Bwavelength
- Ctime slots
- Dfrequency
Correct Answer:
B
B

DWDM, or Dense Wavelength Division Multiplexing, efficiently combines multiple optical signals using different wavelengths, not frequencies or time slots. This utilization of unique wavelengths allows for transmitting numerous signals simultaneously over the same optical fiber without interference, significantly enhancing bandwidth and communication capabilities. It stands as one of the core techniques in high-capacity fiber optic networks.
send
light_mode
delete
Question #30

Refer to the exhibit. A network operator recently configured BGP FlowSpec for the internal IT network. What will be inferred from the configuration deployed on the network?
- AThe policy is configured locally on CSR1 and drops all traffic for TCP ports 80 and 443
- BThe policy is configured locally on CSR1 and currently has no active traffic
- CThe policy is learned via BGP FlowSpec and drops all traffic for TCP ports 80 and 443Most Voted
- DThe policy is learned via BGP FlowSpec and has active traffic
Correct Answer:
A
A
send
light_mode
delete
All Pages