Nest 0 Cart
Nest Account
Popular Exams
All Categories...
Nest
Nest 0
Contact
Log In / Sign Up
Copyright 2024 © store. All rights reserved.
Home Cisco® 300-375

Cisco® 300-375 Exam Practice Questions (P. 5)

  • Full Access (53 questions)
  • Six months of Premium Access
  • Access to one million comments
  • Seamless ChatGPT Integration
  • Ability to download PDF files
  • Anki Flashcard files for revision
  • No Captcha & No AdSense
  • Advanced Exam Configuration
Get Contributor Access
Question #21
An engineer requires authentication for WPA2 that will use fast rekeying to enable clients to roam from one access point to another without going through the controller. Which security option should be configured?
  1. A
    PSK
  2. B
    AES
  3. C
    Cisco Centralized Key Management
  4. D
    802.1x

Correct Answer:
C
Cisco Centralized Key Management (CCKM) is the first fast-secure roaming method developed and implemented on enterprise WLANs, created by
Cisco as the solution used in order to mitigate the delays explained thus far, when 802.1X/EAP security is used on the WLAN. As this is a Cisco proprietary protocol, it is only supported by Cisco WLAN infrastructure devices and wireless clients (from multiple vendors) that are Cisco Compatible Extension (CCX)- compatible for CCKM.
CCKM can be implemented with all of the different encryption methods available for WLANs, to include: WEP, TKIP, and AES. It is also supported with most of the
802.1X/EAP authentication methods used for WLANs, dependent upon the CCX version supported by the devices.
Reference: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116493-technote-technology-00.html#anc8

Question #22
Refer to the exhibit.

A customer is having problems with clients associating to the wireless network. Based on the configuration, which option describes the most likely cause of the issue?
  1. A
    Both AES and TKIP must be enabled.
  2. B
    SA Query Timeout is set too low.
  3. C
    Comeback timer is set too low.
  4. D
    PMF is set to "required".
  5. E
    MAC Filtering must be enabled. E

Correct Answer:
Explanation

Question #23
SIMULATION -

Scenario -
Refer to the exhibit. Configure the WLC to support WPA+WPA2 with PSK. Create a new WLAN ID 11. The SSID and Profile Name should be the same. The
Controller Management interface has been preconfigured for you. The Client Laptop will automatically connect to the WLAN if your configuration is correct. Verify your configuration by using the Cisco 2504 WLC screens when you have completed the configuration.
Note, not all menu items, text boxes, or radio buttons are active.







Correct Answer:
Here is the solution below
Please refer to this link to configure new WLC:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116880-config-wpa2-psk-00.html

Question #24
Which Cisco feature must an engineer configure on a Cisco WLC to enable PCI specification compliance for communication of neighbor radio information?
  1. A
    RF Grouping
  2. B
    MFP
  3. C
    Rogue Access Point Detection
  4. D
    RRM NDP
  5. E
    Off Channel Scanning

Correct Answer:
D
The Cisco Neighbor Discovery Packet (NDP) is the fundamental tool for RRM and other wireless applications that provides information about the neighbor radio information. You can configure the Cisco WLC to encrypt neighbor discovery packets. This feature enables you to be compliant with the PCI specifications.
Reference: http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01111111.html

Question #25
The final section of each exam is exclusively available to users with Contributor Access. This temporary measure was implemented to cover the expenses of the SecExams infrastructure and moderation staff while also decreasing the load on our infrastructure.
  1. A
    Restricted Option
  2. B
    Restricted Option
  3. C
    Restricted Option
  4. D
    Restricted Option
Previous Questions Next Questions

All Pages