Nest 0 Cart
Nest Account
Popular Exams
All Categories...
Nest
Nest 0
Contact
Log In / Sign Up
Copyright 2024 © store. All rights reserved.
Home Cisco® 210-065

Cisco® 210-065 Exam Practice Questions (P. 2)

  • Full Access (341 questions)
  • Six months of Premium Access
  • Access to one million comments
  • Seamless ChatGPT Integration
  • Ability to download PDF files
  • Anki Flashcard files for revision
  • No Captcha & No AdSense
  • Advanced Exam Configuration
Get Contributor Access
Question #11
Which four features are supported by Cisco TelePresence Server for all hardware models in remotely managed mode? (Choose four.)
  1. A
    auto-attendant
  2. B
    ClearPath
  3. C
    Cluster sizes of more than 5 servers
  4. D
    Cascading
  5. E
    Active presence for all devices
  6. F
    Support for Conductor
  7. G
    Native scheduling capabilities

Correct Answer:
BDEF
Reference: http://www.cisco.com/c/en/us/products/collateral/conferencing/telepresence-server/datasheet-c78-736947.html

✑ Support for Cisco ClearPath provides improved media resilience with lossy networks.
✑ The ability to extend meetings beyond the capacity of one server by cascading from server to server or to include Cisco WebEx Meeting Center users, extending the scale of meetings and enabling more people to join meetings.
✑ An enhanced user experience with features including Cisco ActivePresencelayouts, ActiveControl in-meeting controls, and individual participant identifiers; and Cisco ClearPath for optimal video quality
✑ Requires Cisco TelePresence Conductor Version XC2.2 or later.

Question #12
A technician is trying to pair a Touch 8 with a Cisco TelePresence SX20 endpoint, but the codec is not automatically listed in the touch panel. What are two possible reasons for this behavior? (Choose two.)
  1. A
    The codec firmware version is below version TC 6.1.
  2. B
    The codec and the Touch 8 are on separate subnets.
  3. C
    Pairing visibility mode is not active on the codec.
  4. D
    The codec is not compatible with a Touch 8 device.
  5. E
    The Touch 8 is connected via the second Ethernet port on the codec.

Correct Answer:
BC
The two basic reasons for the codec to not gett8ng listed can be:
1. Codec and the Touch 8 are not able to communicate with each other and possibly they are on different subnets.
2. Pairing visibility mode is not active on the codec.

Question #13
Cisco TMS is unable to manage endpoints and an engineer is required to capture logs to determine the cause. What is the menu path that the engineer should follow to capture and download logs from Cisco TMS?
  1. A
    Administrative Tools > Diagnostics > TMS Tickets
  2. B
    Administrative Tools > TMS Server Maintenance > Download Diagnostic Files
  3. C
    Systems > Navigator > Diagnostics > Download Diagnostic Files
  4. D
    Systems > Navigator > TMS Logs

Correct Answer:
B
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco_TMS_Release_Note_14-3-1.pdf
The correct path is: Administrative Tools > TMS Server Maintenance > TMS
Diagnostics >Download Log Files.

Question #14
An engineer is creating a system backup on a Cisco VCS. Which two options describe characteristics of Cisco VCS backups? (Choose two.)
  1. A
    The backup can be sent to the remote SFTP server.
  2. B
    The backup can be encrypted with a password.
  3. C
    The backup can be sent to additional servers in the cluster.
  4. D
    The backup is valid for 30 days.
  5. E
    The backup is stored in Cisco TMS.
  6. F
    The backup is only downloadable locally.

Correct Answer:
BF
Reference: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/admin_guide/Cisco_VCS_Administrator_Guide_X7-2.pdf

To create a backup of the VCSs system data:
1. Go to the Backup and restore page (Maintenance > Backup and restore).
2. Optionally, enter an Encryption password with which to encrypt the backup file. If a password is specified, the same password will be required to restore the file.
3. Click Create system backup file.
4. After the backup file has been prepared, a pop-up window appears and prompts you to save the file (the exact wording depends on your browser). The default name is in the format: ___backup.tar.gz. (The file extension is normally .tar.gz.enc if an encryption password is specified. However, if you use Internet Explorer to create an encrypted backup file, the filename extension will be .tar.gz.gz by default. These different filename extensions have no operational impact; you can create and restore encrypted backup files using any supported browser.) Note that the preparation of the system backup file may take several minutes. Do not navigate away from this page while the file is being prepared.
5. Save the file to a designated location.
Note that log files are not included in the system backup file.

Question #15
A technician has installed and powered on a Cisco TelePresence MCU 5320 and is connected via the console port. The technician needs to determine the IP settings that were automatically assigned via DHCP. Which command should be entered?
  1. A
    xstatus
  2. B
    show network eth0
  3. C
    status
  4. D
    help static

Correct Answer:
C
Reference: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_5300_Series_Getting_started.pdf
✑ To display the current status of the IP address, enter : status
If you have DHCP enabled on your network and you are allowing the MCU to acquire its address using DHCP, the IP address that has been acquired by Ethernet port A will be shown; if you have assigned a static IP address, that is the address that will be shown.

Question #16
The firmware for the primary codec of a Cisco TelePresence System 3010 is being upgraded. Which codec CLI command could be used to check on the progress of the update?
  1. A
    utils upgrade display
  2. B
    utils system version
  3. C
    show upgrade detail
  4. D
    show system upgrade

Correct Answer:
C
Reference: http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/command_ref/tx_sw_cli_book/tx_sw_cli_cmd_show.html#47652 show upgrade [ detail ]

Syntax Description -


Usage Guidelines -
Use this command to view upgrade status. The detail keyword will show the current versions of the peripherals as well as the peripheral firmware versions in the image. If a peripheral has been marked for forced upgrade with the set upgrade commands, the entry will be followed by an "F" in the output. See

Set -

Commands -
and

Unset Commands -
.

Examples -
admin:show upgrade There are no peripherals being upgrade at this timeleft sub system...There are no peripherals being upgrade at this timeright sub system...There are no peripherals being upgrade at this time

Question #17
A Cisco TelePresence VCS displays this alarm: "Root password is set to default." How can this security warning be addressed?
  1. A
    Use the Cisco TelePresence VCS web user interface, choose Administration > User Settings, and change the root password.
  2. B
    Use SSH to log in to the Cisco TelePresence VCS as Administrator and issue the command xconfig root set passwd.
  3. C
    Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command set password, and enter the new password when prompted.
  4. D
    Use SSH to log in to the Cisco TelePresence VCS as Root, issue the command passwd, and enter the new password when prompted.
  5. E
    Use the Cisco TelePresence VCS web user interface, choose Administration > System Settings, and change the root password.

Correct Answer:
D
Reference:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco_VCS_Getting_Started_X5.pdf


Using the Cisco VCS -
After you have set the initial configuration of the Cisco VCS, the system is ready to use. You can continue to use the serial connection to access and manage the
Cisco VCS, or you can connect to the system remotely over IP using either or both:
✑ HTTPS(see" Using the web interface" on next page)
✑ A Command line interface via SSH or Telnet(see"Using the Command Line Interface(CLI)" on next page)

Question #18
A large company wants to procure video conference devices that allow multipoint conferences from C-Series and immersive endpoints that are registered to a
Cisco VCS and Cisco Unified Communications Manager. Which two components meet the requirements of this company? (Choose two.)
  1. A
    Cisco TelePresence Multipoint Switch registered to Cisco VCS
  2. B
    Cisco C-Series endpoint with a multisite option key registered to Cisco VCS
  3. C
    Cisco TelePresence Server registered to Cisco VCS
  4. D
    Cisco C-Series endpoint with a multisite option key registered to Cisco Unified Communications Manager
  5. E
    Cisco TelePresence Multipoint Switch trunked to Cisco Unified Communications Manager

Correct Answer:
CE
Reference:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf

Question #19
A video conference user that is connected via a Cisco TelePresence Codec C40 to a conference that is hosted on a Cisco TelePresence MCU 5300 would like to switch the local layout view. Which two options describe how to switch the local layout view without affecting the view of remote users? (Choose two.)
  1. A
    Use the Administrator settings from the local touch control.
  2. B
    Use the Participant settings from the MCU 5300 web interface.
  3. C
    Use the Call settings from the remote control.
  4. D
    Use the Call Control settings from the codec web interface.
  5. E
    Use the Conference settings from the codec web interface.

Correct Answer:
BD
Reference:
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/profile-series/tc6/administration_guide/profile_c60-c40_and_codec_c60- c40_administrator_guide_tc60.pdf

Question #20
Management would like to set up a permanent recurring Cisco TelePresence meeting where the team would dial into to a preconfigured number. Which meeting type should be used?
  1. A
    scheduled conference
  2. B
    ad hoc conference
  3. C
    rendezvous conference
  4. D
    multiway conference

Correct Answer:
C
Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab09/clb09/confernc.html


Rendezvous Conference -
Rendezvous conferences (also called meet-me, static, or permanent conferences) require endpoints to dial in to a predetermined multipoint resource. These multipoint resources are shared by a number of endpoints and are capable of hosting many conferences at the same time. Because a dedicated device is used to host rendezvous conferences, these conferences can have many more participants than multisite conferences (but not necessarily more than an ad-hoc conference on a dedicated multipoint device).

Previous Questions Next Questions

All Pages