HP HPE6-A79 Exam Practice Questions (P. 4)
- Full Access (55 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #16
Refer to the exhibits.


A user reports slow response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s phone supports 802.11ac in the 5 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?


A user reports slow response time to a network administrator and suggests that there might be a problem with the WLAN. The user’s phone supports 802.11ac in the 5 GHz band. The network administrator finds the user in the Mobility Master (MM) and reviews the output shown in the exhibit.
What can the network administrator conclude after analyzing the data?
- AThe low SNR forces the client to back off to low MCs, therefore speed is low and retransmits are high.
- BClient health is poor, but SNR is fair. TX power must be increased in both the client and the AP.
- CSince SNR is good, then the high retransmit rate must be due a hidden node scenario or high interference.
- DHigh Successful frame count and high Max Speed is an indication of a healthy client. Connection will improve at any time.
Correct Answer:
D
D
send
light_mode
delete
Question #17
HOTSPOT -
A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?
A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?

send
light_mode
delete
Question #18
Refer to the exhibit.

A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)

A 7008 Branch Office Controller (BOC) is deployed in a remote office behind a core router. This core does not support 802.1q encapsulation. The Mobility Controller (MC) is the gateway for two tunneling mode SSIDs, as shown in the exhibit.
Which two different configuration options ensure that wireless users are able to reach the branch network through the router? (Choose two.)
- AConfigure all ports of the BOC as access ports on the controller VLAN, and change the gateway of clients to the core router IP.
- BConfigure the uplink of the BOC as an access port on the controller VLAN, and add static routes in the router for the SSID VLAN subnets.Most Voted
- CConfigure the uplink of the BOC as a trunk port that permits the controller and the SSID VLANs. The controller VLAN must be native.
- DConfigure the uplink of the BOC as an access port on the controller VLAN, and enable NAT for the SSID VLANs.Most Voted
- EConfigure the uplink of the BOC as a trunk port, tagging the controller and the SSOD VLANs, and enable NAT for the SSID VLANs.
Correct Answer:
BE
BE
send
light_mode
delete
Question #19
Refer to the exhibits.
Exhibit 1 -

Exhibit 2 -

Exhibit 3 -

Exhibit 4 -

A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.
Which names correlate with the authentication and captive portal servers?
Exhibit 1 -

Exhibit 2 -

Exhibit 3 -

Exhibit 4 -

A captive portal-based solution is deployed in a Mobility Master (MM) - Mobility Controller (MC) network. A wireless station connects to the network and attempts the authentication process. The outputs are shown in the exhibits.
Which names correlate with the authentication and captive portal servers?
- AClearPass.23 is the authentication server, and cp.mycompany.com is the captive portal server.
- BClearPass.23 is the authentication server, and MC2 is the captive portal server.Most Voted
- CInternal database in MC2 is the authentication server, and cp.mycompany.com is the captive portal server.
- Dcp.mycompany.com is the authentication server, and ClearPass.23 is the captive portal server.
Correct Answer:
A
A
send
light_mode
delete
Question #20
An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20. They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the lowest convergence time and require no human interaction in case of failure.
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)
The servers host other virtual machines and are connected to different switches that implement ACLs to protect them. The organization grants the network consultant access to the servers only, and appoints a network administrator to assist with the deployment.
What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)
- AAllocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another IP address for its gateway.
- BAllocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second MM and another IP address for its gateway.
- CConfigure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.
- DAllocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the second MM and another for the VIP.
- EConfigure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
Correct Answer:
AE
AE
send
light_mode
delete
All Pages