HP HPE6-A71 Exam Practice Questions (P. 5)

An administrator configures the MultiZone feature for a company network, where a mobility cluster is the primary zone and a standalone controller in the company's DMZ represents a secondary data zone. The administrator configures two AP Groups and respective VAPs for the zones on the Mobility Master (MM) in the primary zone. When the APs boot up and establish connections to both zones, the administrator notices that no data connections are established to the data zone.
What must the administrator do to fix this problem?

An administrator troubleshoots a roaming problem where a user loses connectivity to the network during the roaming process. To help troubleshoot this problem, which device or devices in a wireless network initiates the roaming process?

Which RAP WLAN operation mode should an administrator configure if the SSID should only be advertised if controller connectivity is lost?

An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and
10.1.305.114. The administrator accesses an AP associated with this cluster, reboots it, and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

Which ArubaOS CLI command can an administrator execute to determine if AP load balancing is enabled in a cluster?