Nest 0 Cart
Nest Account
Popular Exams
All Categories...
Nest
Nest 0
Contact
Log In / Sign Up
Copyright 2024 © store. All rights reserved.
Home Cisco® 300-365

Cisco® 300-365 Exam Practice Questions (P. 4)

  • Full Access (54 questions)
  • Six months of Premium Access
  • Access to one million comments
  • Seamless ChatGPT Integration
  • Ability to download PDF files
  • Anki Flashcard files for revision
  • No Captcha & No AdSense
  • Advanced Exam Configuration
Get Contributor Access
Question #16
After a wireless deployment, users report that wireless voice clients are experiencing an unacceptable amount of delay while roaming during a call on the Cisco
Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code, operating in a centralized deployment. What configuration issue is most likely contributing to the problem?
  1. A
    The authentication should be set to WPA2-PSK to allow for 802.11n speeds for the Cisco Unified 7925 phones.
  2. B
    The access points on that floor are all on one controller and should be load balanced evenly across multiple controllers.
  3. C
    The access points for that floor are salt and peppered across multiple controllers and should be moved to the primary controller.
  4. D
    The wireless phones are operating in the 2.4 GHz band and should be configured for the 5 GHz band.

Correct Answer:
B

Question #17
A network engineer is debugging issues with the mDNS gateway. Which type of reply should be seen in the Wireshark capture when querying for a mDNS service in the Bonjour Cache?
  1. A
    unicast from Prime Infrastructure
  2. B
    unicast from controller
  3. C
    multicast from devices
  4. D
    multicast from controller
  5. E
    unicast from devices
  6. F
    multicast from Prime Infrastructure

Correct Answer:
B
References: http://www.cisco.com/c/en/us/td/docs/wireless/technology/bonjour/Bonjour74/Bonjour_Deployment.html

Question #18
A network engineer must configure a 5 GHz network to allow for the greatest density of radios possible with the least amount of co-channel interference. Which configuration best fulfills this requirement?
  1. A
    Set 802.11h Local Power constraint to 25 dBm.
  2. B
    Set DCA to 20 MHz channels and enable Extended UNII-2 channels.
  3. C
    Enable Event Driven RRM in 5 GHz with a sensitivity of High. n
  4. D
    Configure TPC Power Threshold to -80 dBm and set interference Optimal Mode (TPCv2).

Correct Answer:
B
References: http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1250-series/design_guide_c07-693245.html#wp9001447

Question #19
What is the default NMSP echo interval between a Mobility Services Engine and Wireless LAN Controller?
  1. A
    30 Seconds
  2. B
    15 Seconds
  3. C
    10 Seconds
  4. D
    60 Seconds

Correct Answer:
B
http://www.cisco.com/en/US/docs/wireless/mse/3350/6.0/CAS/configuration/guide/msecg_ch4_CAS.html

Question #20
A network engineer has installed 802.11ac access points with 80 MHz enabled; however, in the conference rooms, co-channel interference is being noticed.
Under which tab in the RF profiles configuration can the engineer find the settings to tune the channel width for a group of APs?
  1. A
    802.11
  2. B
    RRM
  3. C
    High Density
  4. D
    General

Correct Answer:
B
[1]

Previous Questions Next Questions

All Pages