Cisco® 200-301 Exam Practice Questions (P. 4)
- Full Access (1404 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #31
What are two descriptions of three-tier network topologies? (Choose two.)
- AThe distribution layer runs Layer 2 and Layer 3 technologiesMost Voted
- BThe network core is designed to maintain continuous connectivity when devices failMost Voted
- CThe access layer manages routing between devices in different domains
- DThe core layer maintains wired connections for each host
- EThe core and distribution layers perform the same functions
Correct Answer:
AB
AB

The distribution layer in a three-tier network topology integrates both Layer 2 and Layer 3 technologies. This allows for efficient management and routing capabilities between different network segments. Additionally, the core layer is designed to ensure high availability and maintain continuous connectivity across the network, even in the event of device failures. This resilience is crucial for maintaining the integrity and performance of the entire network infrastructure.
send
light_mode
delete
Question #32
Which type of IPv6 address is publicly routable in the same way as IPv4 public addresses?
- Amulticast
- Bunique local
- Clink-local
- Dglobal unicastMost Voted
Correct Answer:
D
D

Global unicast addresses in IPv6 are comparable to IPv4 public addresses in terms of their routability on the public internet. These addresses are designated by the prefix ranging from 2000::/3 and are indispensable for widespread internet communications. They are assigned by Regional Internet Registries, ensuring global uniqueness and facilitating efficient routing across various networks, mirroring the function of public IPv4 addresses.
send
light_mode
delete
Question #33
What is the expected outcome when an EUI-64 address is generated?
- AThe interface ID is configured as a random 64-bit value
- BThe characters FE80 are inserted at the beginning of the MAC address of the interface
- CThe seventh bit of the original MAC address of the interface is invertedMost Voted
- DThe MAC address of the interface is used as the interface ID without modification
Correct Answer:
C
C
send
light_mode
delete
Question #34
A corporate office uses four floors in a building.
✑ Floor 1 has 24 users.
✑ Floor 2 has 29 users.
Floor 3 has 28 users.

✑ Floor 4 has 22 users.
Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?
✑ Floor 1 has 24 users.
✑ Floor 2 has 29 users.
Floor 3 has 28 users.

✑ Floor 4 has 22 users.
Which subnet summarizes and gives the most efficient distribution of IP addresses for the router configuration?
- A192.168.0.0/24 as summary and 192.168.0.0/28 for each floor
- B192.168.0.0/23 as summary and 192.168.0.0/25 for each floor
- C192.168.0.0/25 as summary and 192.168.0.0/27 for each floorMost Voted
- D192.168.0.0/26 as summary and 192.168.0.0/29 for each floor
Correct Answer:
C
C
send
light_mode
delete
Question #35

Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network. Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?
- A10.10.225.48 255.255.255.240
- B10.10.225.32 255.255.255.240
- C10.10.225.48 255.255.255.224
- D10.10.225.32 255.255.255.224Most Voted
Correct Answer:
D
D
send
light_mode
delete
Question #36
What is a characteristic of spine-and-leaf architecture?
- AEach link between leaf switches allows for higher bandwidth.
- BIt provides greater predictability on STP blocked ports.
- CIt provides variable latency.
- DEach device is separated by the same number of hops.Most Voted
Correct Answer:
D
D
send
light_mode
delete
Question #37
An office has 8 floors with approximately 30-40 users per floor. One subnet must be used. Which command must be configured on the router Switched Virtual
Interface to use address space efficiently?
Interface to use address space efficiently?
- Aip address 192.168.0.0 255.255.0.0
- Bip address 192.168.0.0 255.255.254.0Most Voted
- Cip address 192.168.0.0 255.255.255.128
- Dip address 192.168.0.0 255.255.255.224
Correct Answer:
B
B
send
light_mode
delete
Question #38
DRAG DROP -
Drag and drop the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Select and Place:

Drag and drop the descriptions of IP protocol transmissions from the left onto the IP traffic types on the right.
Select and Place:

send
light_mode
delete
Question #39
A device detects two stations transmitting frames at the same time. This condition occurs after the first 64 bytes of the frame is received. Which interface counter increments?
send
light_mode
delete
Question #40

Refer to the exhibit. Which outcome is expected when PC_A sends data to PC_B after their initial communication?
- AThe source MAC address is changed.
- BThe destination MAC address is replaced with ffff.ffff.ffff.
- CThe source and destination MAC addresses remain the same.Most Voted
- DThe switch rewrites the source and destination MAC addresses with its own.
Correct Answer:
C
C
send
light_mode
delete
All Pages