Cisco® 200-105 Exam Practice Questions (P. 5)
- Full Access (693 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #41
You enter the show ipv6 route command on an OSPF device and the device displays a route. Which conclusion can you draw about the environment?
- AOSPF is distributing IPv6 routes to BGP.
- BThe router is designated as an ABR.
- CThe router is designated as totally stubby.
- DOSPFv3 is in use.
Correct Answer:
D
D
send
light_mode
delete
Question #42
Which configuration can you apply to enable encapsulation on a subinterface?
- Ainterface FastEthernet 0/0 encapsulation dot1Q 30 ip address 10.1.1.30 255.255.255.0
- Binterface FastEthernet 0/0.30 ip address 10.1.1.30 255.255.255.0
- Cinterface FastEthernet 0/0.30 description subinterface vlan 30
- Dinterface FastEthernet 0/0.30 encapsulation dot1Q 30 ip address 10.1.1.30 255.255.255.0
Correct Answer:
D
D
send
light_mode
delete
Question #43
Which part of the PPPoE server configuration contains the information used to assign an IP address to a PPPoE client?
- Avirtual-template interface
- BDHCP
- Cdialer interface
- DAAA authentication
Correct Answer:
A
A
send
light_mode
delete
Question #44
Which three statements are typical characteristics of VLAN arrangements? (Choose three.)
- AVLANs cannot span multiple switches.
- BVLANs typically decrease the number of collision domains.
- CConnectivity between VLANs requires a Layer 3 device.
- DEach VLAN uses a separate address space.
- EA new switch has no VLANs configured.
- FA switch maintains a separate bridging table for each VLAN.
Correct Answer:
CDF
CDF
send
light_mode
delete
Question #45
Which statement about slow inter-VLAN forwarding is true?
- AThe VLAN is experiencing slowness in the point-to-point collisionless connection.
- BThe VLANs are experiencing slowness because multiple devices are connected to the same hub.
- CThe local VLAN is working normally, but traffic to the alternate VLAN is forwarded slower than expected.
- DThe entire VLAN is experiencing slowness.
- EThe VLANs are experiencing slowness due to a duplex mismatch.
Correct Answer:
E
E
send
light_mode
delete
Question #46
Which version of SNMP first allowed user-based access?
send
light_mode
delete
Question #47
Which two circumstances can cause collision domain issues on VLAN domain? (Choose two.)
- Aduplex mismatches on Ethernet segments in the same VLAN
- Bmultiple errors on switchport interfaces
- Ccongestion on the switch inband path
- Da failing NIC in an end device
- Ean overloaded shared segment
Correct Answer:
CE
CE
send
light_mode
delete
Question #48
Which two components are used to identify a neighbor in a BGP configuration? (Choose two.)
- Aautonomous system number
- Bversion number
- Crouter ID
- Dsubnet mask
- EIP address
Correct Answer:
AE
AE
send
light_mode
delete
Question #49
Which EIGRP for IPv6 command can you enter to view the link-local addresses of the neighbors of a device?
- Ashow ipv6 eigrp 20 interfaces
- Bshow ipv6 route eigrp
- Cshow ipv6 eigrp neighbors
- Dshow ip eigrp traffic
Correct Answer:
C
C
send
light_mode
delete
Question #50
What are two drawbacks of implementing a link-state routing protocol? (Choose two.)
- Athe sequencing and acknowledgment of link-state packets
- Bthe high volume of link-state advertisements in a converged network
- Cthe requirement for a hierarchical IP addressing scheme for optimal functionality
- Dthe high demand on router resources to run the link-state routing algorithm
- Ethe large size of the topology table listing all advertised routes in the converged network
Correct Answer:
CD
CD
send
light_mode
delete
All Pages