CWNP CWDP-302 Exam Practice Questions (P. 5)
- Full Access (60 questions)
- Six months of Premium Access
- Access to one million comments
- Seamless ChatGPT Integration
- Ability to download PDF files
- Anki Flashcard files for revision
- No Captcha & No AdSense
- Advanced Exam Configuration
Question #21
ABC Company has a WLAN controller with 10 controller-based APs; the Voice SSID is configured for centralized data forwarding. Each AP is connected to an access port on a layer-2 Ethernet switch. Each layer-2 switch is uplinked to a single layer-3 core Ethernet switch. The WLAN controller is connected directly to the layer-3 core Ethernet switch. Layer-3 tunnels are created between all controller-based APs and the WLAN controller. A voice server is connected to the layer-3
Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA's IP data packet gets mapped to what and by which device?
Ethernet switch.
When a voice-enabled QoS STA sends an IP data packet to a voice server in this scenario, the DSCP value carried in the STA's IP data packet gets mapped to what and by which device?
- AThe DSCP value is mapped to an IEEE 802.1Q priority tag value by the WLAN controller.
- BThe DSCP value is mapped to the DSCP value in the encapsulating IP header by the layer-3 switch.
- CThe DSCP value is mapped to an IEEE 802.1p (802.1D-2004) UP value by the access point.
- DThe DSCP value is mapped to an IEEE 802.1Q VLAN tag by the access point.
Correct Answer:
A
A
send
light_mode
delete
Question #22
Given: For this fill-in the blank question, each answer option contains an answer for the first and second blanks, separated by a dash "—". Choose the answer option that correctly fills in both blanks in the following sentence.
A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.
A WLAN may use 802.11 admission control to ________, and admission control requirements are configured separately for each ________.
- ABlock stations with inadequate security parameters — SSID
- BIdentify voice-enabled wireless devices — AP radio (that is, 2.4 GHz or 5 GHz)
- CRegulate the available bandwidth resources — Access Category
- DMark ingress and egress frames with priority values — TCP/IP port
Correct Answer:
C
C
send
light_mode
delete
Question #23
In a large enterprise (5000+ wireless users), by what would NOT be a recommended method by which IP addresses and VLANs are assigned to different clients associated to the same AP?
- AEach SSID is mapped to a static VLAN assignment
- BUpstream AAA servers dynamically assign VLANs to each user or group profile
- CRadio signal metrics (RSSI, SNR, etc.) of WLAN clients are triangulated for location-based VLAN assignment during association
- DMultiple VLAN pools are designated for an SSID and user IP addresses are selected in a round-robin fashion from the associated pools
Correct Answer:
C
C
send
light_mode
delete
Question #24
In a multiple channel architecture (MCA) network supporting 802.1X authentication, what aspect of WLAN design affects client roaming efficiency and effectiveness?
- APHY standard used by the AP
- BKey caching protocols
- CCipher suite
- DPHY standard used by client
Correct Answer:
B
B
send
light_mode
delete
Question #25
An associated STA detects a new BSS with the same SSID as the STA's current BSS. The new BSS uses a different IP subnet than the current BSS. If the STA is configured to use 802.1X/EAP preauthentication, what is likely to occur?
- AThe STA will not attempt to preauthenticate because the new BSS uses a different IP subnet.
- BThe STA will attempt to preauthenticate, but fail because the new BSS uses a different data-link broadcast domain.
- CThe STA will attempt to preauthenticate and succeed if DHCP is supported on the new subnet.
- DThe STA will attempt to preauthenticate and succeed if IP Mobility is enabled on the AP or WLAN controller.
Correct Answer:
B
B
send
light_mode
delete
All Pages